reducing tee​ manufacturers

Characteristics and production standard of reducing tee

The three-way pipe fittings are mainly divided into reducing three-way and equal diameter three-way. The following is a brief introduction of reducing three-way. The branches of reducing three-way are called reducing three-way when they are different from the other two diameters.Those with the same diameters at both ends are called equal diameter tees.

Reducing tee features: Reducing tee is widely used in engineering drainage and water supply, pipeline renovation, and water supply renovation in residential areas. The reducing tee produced by our company will be used in such projects, and the quality of the reducing tee is reliable.Reducing tee plays a role in the community is to improve the drinking water piping system.Reducing tee in the use of corrosion resistance, in different industries to show good products and wind play an important role.Reducing tee also has other USES: petroleum, chemical industry, water, beverage, nuclear power, shipbuilding, pipeline and so on.

Our company produces reducing tees mainly by using our hydraulic tees.Hydraulic tee can be produced material is divided into: stainless steel, alloy steel, carbon steel and so on.

The production standard of reducing tee is GB/T12459, GB/T13401, SH3408, SH3409,HG/T21635,HG/ T21631, ASME B16.9, MSS SP-43, DIN 2605, JIS B2313.Wall thickness: SCH5S-SCH160.

The model and material of reducing tee can be produced according to the customer's requirements to meet the customer's satisfaction.

The process by which tee manufacturers make tee

We are a manufacturer of tee products. Tee manufacturers usually adopt the cold extrusion process when they produce tee products.That is, a section of straight pipe is placed in a mold, which is a mold of the tee.Then, after sealing it, squeeze it between the two ends.And in the middle, there is a hole where the three links come out.And then it squeezes a piece of this straight section of the pipe, and it goes away and then it squeezes into the hole that we've assigned it to, and the end result is a blank of our tee, and it comes out.The two ends still need to be processed, and the middle is a completely closed branch of a tee.Such a tee also needs to be sloped, sandblasted, typed, painted, packed and so on according to the customer's requirements

405406