Introduction of tee manufacturers to tee

Introduction of tee manufacturers to tee

Appearance inspection of tee joint by tee joint manufacturer:

The tee shall not have cracks, overburn, overheating and other phenomena, and the surface shall be free from hard points.

No obvious folds are allowed at the root of the tee branch.

Any defects in the tee pipe body are not allowed to be repaired by welding.

carbon steel tee manufacturers test the size of the carbon steel tee: The size of the carbon steel tee manufacturers are related personnel, according to the customer's requirements for testing, and meet all customer requirements.

The surface treatment of tee joint by tee joint manufacturer: the inner and outer surfaces of tee joint shall be smooth and free from defects of destructive strength and appearance, such as scar, scratch, heavy skin, etc., and shall be polished after defects are found. The thinning quantity of the polished joint shall be no less than 93.5% of the original wall thickness. The polished joint shall be smoothed and the defects shall be cleared with colorant or magnetic powder inspection.

The company according to each customer proposed production and testing to the factory, welcome new and old customers to order.

Three pipe fittings are classified according to pipe diameter as follows:

Three pipe fittings can be divided into:

Same-diameter tee: for example, the main and branch tees are of the same caliber.Such a tee is called an equal-diameter tee or an equal-diameter tee.

Reducing tee: Tee whose branch pipe diameter is less than the main pipe diameter is classified according to butt joint form: butt welding tee, which is the tee welded after butt joint with the joint pipe fitting.

Socket tee: it is a tee that is welded or fused after inserting the joint pipe fitting into each end of the tee.

Clamp sleeve type tee: it is a tee with each end being a clamp sleeve joint that is inserted and then tightened.

Threaded tee: A tee to which a pipe fitting ZD is threaded.According to the material classification can be divided into stainless steel tee, carbon steel tee, copper tee PVC tee and so on.

Tee pipe fittings can also be classified according to branch pipe form: tee pipe fittings is the tee pipe fittings with branch pipe vertical main.Oblique tee: it is a tee with a certain Angle between the branch pipe and the main pipe.

509510