Manufacturing process of carbon steel tee​

To three - way pipe fittings around the world

Tee fittings is one of our company's manufacturing, our company has a large number of tee fittings, tee fittings are mainly used in the branch pipe of the pipeline, and our tee fittings are used in the pipeline installation.Our company mainly produces various types and materials of three - way pipe fittings.

Tee pipe fittings are mainly used in petroleum, chemical industry and sewage treatment system. Nowadays, branch pipes of urban sewage are all used in our tee pipe fittings.Our company is going all over the world for tee fittings.

The company mainly produces tee, elbow, size head, pipe cap and other pipe fittings.Any purchase of our company above the pipe our company will be at a reasonable price and reliable products, to obtain customer recognition.

Manufacturing process of carbon steel tee

The carbon steel tee is mainly through the tee machine with the tube billet as the original data, through the application of liquid pressure in the tube cavity and axial load, so that it in the mold cavity plastic deformation, the tube wall and the inner surface of the mold, and then get the required shape parts of the forming skills.About the rounded scale is small, difficult to molding products tend to choose sectional compression molding, namely with smaller pressure expansion tube end, first line into a large rounded corners, wall thickness is relatively uniform, at the moment, and then the pressure, forcing fittings mold joint, the rounded materials tensile deformation, the tube wall thinning, it was required for carbon steel tee.

Principle of carbon steel three-way forming: put the tube billet into the lower mold cavity first, press the plunger push head into both ends of the pipe fitting under the action of the hydraulic cylinder, so that the pipe fitting cavity is sealed, and then inject the liquid medium into the pipe fitting cavity through the liquid channel inside the push head;At this moment, the upper die moves downward, and the lower die together to form a closed cavity, and finally the high pressure pump and valve control the liquid pressure is increasing, push the head inward to push pipe fitting, pipe wall deformation and gradually close to the mold inner wall, carbon steel tee forming.

109110