Process flow of santong factory

Process flow of tee factory

Main process of three-way pipe fittings in the processing technology: raw materials into the factory -- cut into blank -- flattening to the size requirements -- heating convex holes -- hot extrusion -- heat treatment -- groove machining groove -- surface treatment -- finished product inspection -- marking protection -- storage the above simple introduction to the processing technology flow of three-way pipe fittings.

The material of tee pipe is divided into carbon steel, alloy steel, stainless steel and so on.

Tee manufacturers for tee pipe fittings manufacturing standards: GB, American standard, electrical standard according to the customer's manufacturing standards directly manufacturing production.

The diameter and wall thickness of tee pipe fittings produced by tee manufacturers are manufactured directly according to the requirements of customers.

Is the company's main tee pipe fittings manufacturer, located in the corner of the pipe fittings of all, the branch pipe tee pipe fittings are mainly used for pipe, tee pipe fittings are divided into equal tee and reducing tee, equal tee plays a role in pipeline is the main line and branch pipe is the same, reducing tee branch pipe in the pipe mouth, mouth and branch pipe one in diameter and reducing tee pipe installation of differences.Welcome new and old user's presence and the consultation order.

Three - way pipe fitting manufacturers use advanced equipment to obtain customers

In recent years, the three-way pipe fittings has been greatly improved in the market, manufacturers of three-way pipe fittings have also been increasing, and the competitiveness in the market is getting bigger and bigger.This leads to the continuous reduction of tee pipe fittings by manufacturers.Our company chooses advanced equipment and technology for the production of three-way pipe fittings and obtains the approval of customers.

Three - way pipe fittings, pipe fittings.Also called pipe fittings tee or tee, stainless steel equal diameter tee, tee joint, used in the main pipe to branch pipe.The processing method of cold drawing tee fitting is: marking the tee where the pipe is to be processed and piercing the mark.

A tee is provided with three openings, that is, one entrance and two exits;Or a chemical pipe fitting with two entrances and one exit, in t-shape and Y-shape, with equal diameter pipe orifice or reducing pipe orifice, used at three converging points of same or different pipes.

The tee is a section of the main pipe plus a small branch pipe. Obviously, the two large sizes are the main pipe and the small size is the branch pipe.In a pure oxygen pipeline, there is usually pressure and oxygen is more active.If a cold-drawn tee is used, as long as the sundries in the pipe move along with the oxygen flow, the collision between sundries and the pipe may be caused due to the change in pipe diameter and flow velocity, or the electrostatic discharge generated due to the change in flow velocity may cause the fire of the pure oxygen pipe.

A jacking device, including metal, jacking device, commutator and bracket, shall be installed on the pipe;When the metal bar is heated and the metal bar is pushed out by jack and metal bar, the tube wall material will naturally turn out outward to form the cold-drawn tee blank;Then the pipe segments of certain length and corresponding specifications are welded on the blank of the cold-drawn tee formed by the ejecting to produce the final product.

103104